FEP食品医药化学软管
-
口 径： |
20-75MM |
颜 色： |
黑色 |
温 度： |
-40℃~150℃ |
材 质： |
食品、医药、化工、中间体等高腐蚀、高洁净要求的部位 |
特 性： |
耐老化、耐臭氧、防静电、FDA |
认 证： |
EN12115 |
应用范围： |
食品、医药、化工、中间体等高腐蚀、高洁净要求的部位 |
?
Description/产品详情
Marsoflex PTFE食品医药化学软管
The FEP Chemical Hose Type 44 HW is the perfect hose for the loading and unloading of tank vehicles, rail wagons and tank ships as well as for mobile and non-moving facilities in the chemical and pharmaceutical industries.
It is suitable for the suction and discharge of almost all aggressive chemicals, fuels, solvents and oils.
The few chemicals that corrode the tube are: chlorine trifluoride, fluor gas dry +150°C, oxygen difluoride, phosgene gas and fused alkali metals such as sodium.
The FEP Chemical Hose Type 44 HW complies with EN 12115.
Hose tube: FEP, seamless, bright, smooth, FDA compliant
Hose reinforcements: High-strength textile braids, kink-resistant spring steel wire spirals
Hose cover: EPDM, black, fabric pattern.
Resistant to ozone and weather influences.
Electrical resistance: R < 102 Ω
Note: It is possible to clean the hose when depressurised at a maximum temperature of 130°C for about 30 minutes using steam.
Temperature range: -40°C to +150°C
(depending on media)
Roll length: 40 meters
Marking: The FEP Chemical Hose
Type 44 HW is marked in accordance with EN12115 and, in addition, with a batch number.
Thus traceability is guaranteed at all times.
应用范围：该FEP化学软管是理想的装卸载软管，应用于铁路槽车锅炉油轮，以及为移动和固定使用在化工和制药工厂产业。它适用于抽吸和输送几乎所有的腐蚀性化学品，如燃料，溶剂和油类。
改软管不适用于下属介质：三氟化氯，干氟气+ 150℃，氧氟，光气和熔融的碱金属如钠。
软管结构：
内管：FEP，无缝，质轻，平稳，符合FDA标准
软管增强层：高强度纺织编织，螺旋弹簧钢丝
软管外层：EPDM，黑色，耐臭氧和耐劳化。
电阻：R<102Ω
注意： 可在不加压的情况下, 使用130℃蒸汽进行约30分钟清洗
温度范围：-40°C至+ 150°C（取决于输送介质）
卷长：40米
产品代码 | 内径 | 内径 | 弯曲半径 | 工作压力 | 爆破压力 | 真空度 |
ITEM CODE | INCH | MM | MM | BAR | BAR | BAR |
44 HW 019 | 3/4 | 19 | 200 | 16 | 64 | 0.9 |
44 HW 025 | 1 | 25 | 225 | 16 | 64 | 0.9 |
44 HW 032 | 1.25 | 32 | 275 | 16 | 64 | 0.9 |
44 HW 038 | 1.5 | 38 | 340 | 16 | 64 | 0.9 |
44 HW 050 | 2 | 50 | 415 | 16 | 64 | 0.9 |
44 HW 075 | 3 | 75 | 525 | 16 | 64 | 0.9 |
